TLT...(-420)Temperature transmitter TLT is a range of high quality temperature transmitters for immersion mounting

Duct sensor for air temperature measurement in ventilation ducts. Adjustable insertion length.

Short facts about TRTC5(-D) ? Output signal Modbus ? Temperature, 0...50?C ? Good long-term stability ? Modbus communication

Duct sensors QFM21... for relative humidity and temperature ? Operating voltage AC 24 V / DC 13.5...35 V ? Signal output DC 0...10 V / 4?20 mA for relative humidity ? Signal output DC 0...10 V / 4?20 mA / T1 / LG-Ni 1000 for temperature ? Measuring accuracy ? 3 % r. h. within the comfort range ? Range of use -15?+60 ?C / 0?95 % r. h. (non-condensing)

QFA31 ... สำหรับการใช้งานในการระบายอากาศและเครื่องปรับอากาศพืชที่มีความแม่นยำสูงและเวลาตอบสนองสั้นสำหรับการวัดความชื้นสัมพัทธ์จะต้อง ช่วงการวัดครอบคลุมช่วงความชื้นที่ช่วง 0 ... 100%rh

Differential pressure sensor QBM2030-... for air and non-aggressive gases ? Pressure-linear characteristic with selectable pressure measuring range ? Operating voltage AC 24 V or DC 13.5?33 V ? Output signal DC 0...10 V ? Zero-point adjustment ? Simple and fast mounting thanks to integrated mounting brackets in the housing ? Maintenance free ? Calibrated and temperature-compensated measuring signal ? Supplied with tubing connection set

Outside Temperature Sensors QAC31... ? Active sensors for acquiring the outside temperature ? Operating voltage AC 24 V or DC 13.5?35 V ? Signal output DC 0...10 V or 4...20 mA

The type 604 pressure switch is used as a ?p flow switch in ventilation ducts for the control of filters and fans, and in primary and secondary control systems for the control of air dampers. The 604 pressure monitoring switches are also ideally suited to protect heating coils from overheating and for monitoring industrial air cooling circuits.

เซ็นเซอร์สำหรับการวัดอุณหภูมิแบบ Passiveของอากาศในท่ออากาศ การใช้งาน เซ็นเซอร์อุณหภูมิท่อสำหรับใช้ในการระบายอากาศและเครื่องปรับอากาศพืชเป็น:

Duct sensor for air temperature measurement in ventilation ducts.

The SERIES WD Water Detectors and Sensor Tapes is designed for dependable detection of water presence even of low conductive liquids. The water sensing tape attaches to module and if any liquid comes in contact with the tape the resistance is changed and the alarm will be triggered. The sensing tape is 1? wide and can be bought in lengths of 5, 10, 15 and 25? and is powered by 24 VAC or 24 to 30 VDC.

Relative, and differential pressure transmitter type 699 Pressure range -1 ... 1 mbar / 0 ... 0.3 - 50 mbar

Analog Sensors?1000 ? Platinum (375 ?) RTD Description 1000 Ohm Platinum (375 ?) RTD sensors provide input for cost-effective, accurate temperature sensing (detecting) via a 20 AWG twisted, shielded cable pair. The sensor resistance varies according to the temperature being measured. Several models are available for specific mounting and sensing applications.

The Siemens Point Pickup Modules (PPM) are expansion I/O devices that communicate on a BACnet master-slave/token-passing (MS/TP) network, allowing for the incorporation of a cluster of remote points into the Building Automation Station over the MS/TP network. The PPM family leverages the MS/TP network to extend the reach of any BTL-listed BACnet Building Controllers application program. Each Universal Input can be configured for analog or digital input. Input/Output type is configured by writing to BACnet object properties.

The room hygrostats are used for controlling and monitoring relative humidity in ventila-tion or air conditioning plant. They ensure room humidity control within the selectable range of 30 to 90 % relative humidity by controlling humidification or dehumidification equipment. They can also be used for monitoring minimum or maximum humidity levels.

The EXOcompact controllers are perfect for stand-alone applications, e.g. zone control, control of heating and air handling units, as well as for system integration. They have a powerful processor and are available in three sizes with 8, 15 or 28 I/Os, with or without display.

The controller for simple applications Optigo is a series of compact, economic and versatile stand-alone controllers. They are pre-programmed and intended for smaller applications. The controllers are extremely easy to install, commission and control.